Hybrid Worship Discussion Forum

During the discussion following the Hybrid Worship Discussion Forum I raised the problem I was having recording ISO tracks while using the sole USB-C out on the  ATEM Mini Pro ISO switcher to send the stream to the laptop. Various solutions were suggested, including the need for a powered USB-C hub (which I tried unsuccessfully) and using a Video Capture Card (which I didn’t try). On YouTube it had also been suggested purchasing a $500 Blackmagic Streaming Bridge. The solution was purchasing a $12 USB-C splitter plugged into the sole Out port on the switcher. However…this only works if the cable to the SSD card (in my case a 500GB Samsung T7) is plugged in first (in which case the Green ready-to-record light on the ATEM lights up) before the laptop cable is plugged into the splitter. This works consistently., and gets around there only being one USB-C out on the ATEM until you get to the Extreme model with two. Thanks, all, for your suggestions. Hope this is helpful to others. Greg Finlayson at St. John’s, East Orangeville.